Tactile guiding ridges
for outdoors
installed in situ

In public spaces, TG Lining installs guiding strips using templates which are applied directly to the substrate in situ. This provides superb adhesion, no intermediate adhesive layer is needed. Guiding strips can be applied to virtually all types of pavement. Without the need for drilling or sawing. The high technical lifespan combined with minimal maintenance costs ensures low life cycle costs. Our systems are intended for pedestrians and are located in pedestrian areas, free of motorized traffic.

The guiding strips can be walked on after approximately 12 hours at a minimum processing temperature of 10°C. By using covering plates, areas remain accessible to pedestrians even during installation works.

(Standard) Structure: 5 or 10 parallel strips

Centre-to-centre dimension: 60 mm

Working path width: 300 or 600 mm

Strips length: 150/250/350 mm

Strips width: 10 mm

Strips height: 1 to 4.5 mm above the finished floor, depending on whether the application is indoors or outdoors and on how level the substrate is

Intermediate distance: 50 mm break in longitudinal direction to allow for simple dirt and water run-off during cleaning

Shape: rectangular, rounded or triangular cross-section