Tactile guiding ridges
for indoor use

In public buildings such as hospitals, schools, cultural centres or town halls, TG Lining installs guiding strips that can be applied in situ directly to the substrate. This provides superb adhesion and no intermediate adhesive layer is needed. Strips can be applied to almost all types of substrates, such as linoleum, marmoleum, vinyl, PVC, concrete or marble.

The installation of guiding strips is possible in both new buildings as well as in retrofit situations, no structural adjustments are necessary and extending an existing guideway is easy.

The strips can be walked on after approximately 12 hours at a minimum processing temperature of 10°C and do not require any post-processing. Because we use covering plates, areas remain accessible to pedestrians even during the execution of our works.

Structure: 10 or 5 parallel Stripss

Centre-to-centre dimension: 60 mm

Working path width: 60 or 30 cm

Strips length: 150/250/350 mm

Strips width: 10 mm

Strips height: up to 4.5 mm above the finished floor, depending on whether the application is indoors or outdoors and on how level the substrate is

Intermediate distance: 50 mm break in longitudinal direction to allow for simple dirt and water run-off during cleaning

Shape: rectangular, rounded or triangular cross-section

Colour: all colours available