Tactile guiding ridges
installed in situ

At bus and tram stops and underground platforms, TG Lining installs tactile guideways using templates which are applied to the substrate directly in situ. This provides superb adhesion without the need for adhesive layers. Guiding strips can be applied to virtually all types of substrate. Minimally invasive, so without drilling or sawing. The high technical lifespan combined with low maintenance costs ensures low life cycle costs.

The guiding strips can be walked on after approximately 12 hours at a minimum processing temperature of 10°C and do not require any post-processing. Because we use covering plates, areas remain accessible to pedestrians/travellers even during execution of our works.


(Standard) Structure: 5 or 10 parallel strips

Centre-to-centre dimension: 60 mm

Working path width: 300 or 600 mm

Strips length: 150/250/350 mm

Strips width: 10 mm

Strips height: 1 to 4.5 mm above the finished floor, depending on whether the application is indoors or outdoors and on how even the substrate is

Intermediate distance: 50 mm break in longitudinal direction to allow for simple dirt and water run-off during cleaning

Shape: rectangular, rounded or triangular cross-section

Unique Selling Points

  • Tailor made patterns
  • Minimally invasive
  • Optimal adhesion
  • Functional and aesthetic
  • Low maintenance
  • Low life cycle costs
  • Compliant with Accessibility Directives